Compass Series Vertical Packaged

Compass xt

GeoComfort® Compass® Series geothermal systems are expertly designed to be technologically advanced, exceptionally efficient and uniquely crafted. The result is a heating and cooling system as beautiful as it is functional. These units offer all of the reliability and comfort you've come to expect from GeoComfort systems with the visual appeal and added benefits that are truly groundbreaking.


GeoComfort Limited Lifetime Warranty
Compass

Product Features

Available Literature

Product Brochure

EMGL0001 thumb

Owner's Manual

20D167 01NN thumb

Compass Series Engineering Data & Installation Manual

20D082 01NN thumb

Product Specifications

XT024

Cooling
Full BTU
27,200
EER
20.3
Part BTU
21,400
EER
29.1
Heating
Full BTU
19,800
COP
4.3
Part BTU
16,600
COP
4.8

XT036

Cooling
Full BTU
38,900
EER
18.3
Part BTU
29,900
EER
27.0
Heating
Full BTU
29,200
COP
4.2
Part BTU
23,200
COP
4.6

XT048

Cooling
Full BTU
49,000
EER
17.1
Part BTU
37,400
EER
24.1
Heating
Full BTU
38,200
COP
3.9
Part BTU
29,700
COP
4.3

XT060

Cooling
Full BTU
63,000
EER
17.8
Part BTU
49,000
EER
24.9
Heating
Full BTU
47,700
COP
3.7
Part BTU
38,600
COP
4.3

XT072

Cooling
Full BTU
71,100
EER
17.1
Part BTU
57,500
EER
23.0
Heating
Full BTU
55,900
COP
3.6
Part BTU
46,700
COP
4.1

Available Accessories

Programmable thermostat

Keeps the home more comfortable by operating the unit on a set schedule and temperature range. This also saves on energy costs by setting the unit back while the home is unoccupied.

Non-programmable thermostat

Designed to take maximum advantage of the multi-stage functionality of the unit. This allows the unit to achieve maximum savings by only operating at the right range to match the current weather.

Auxiliary internal electric heater

Adds that little bit of extra heat on those few coldest days. Also helps to balance the system size by balancing out those few extreme days. With a standard stab-in design, you don't have to drop the blower to install.

Auxiliary external electric heater

Air duct installed unit to add extra heat on the coldest days.

Flow centers - pressurized

Circulates the fluid through the unit and loop field.

Flow center - non-pressurized

Circulates the fluid through the unit and the geothermal loop field. This type of system uses an expansion tank that can be topped off should the loop require it due to thermal expansion.

EWC zone control

These highly sophisticated controls work with dampers in the ductwork to create multiple zones throughout the house. You can utilize one unit, but have different temperatures in each zone. The control panel controls both the unit, and the zone dampers.

Unit air pad (plastic or foam)

The unit air pad creates a buffer between the unit and the home. This buffer prevents any vibration from the unit to be transmitted into the home which improves the already quiet operation of the unit.

Electrostatic filter (washable)

This type of filter is a permanent media filter that can be washed from time to time as needed. This eliminates the need to buy new filters.

Electronic 24 volt air cleaner

This type of filter uses an electrically charged media to increase filtration performance. This improves indoor air quality by removing more particles from the airstream. This filter requires the occasional media replacement.

Disposable pleated filter

This type of filter uses a pleated media to remove dust and other particles from the air stream. It is important to check these filters regularly and replace them as needed.

Consumer purchase plans

With a wide variety of payment options and terms, our consumer payment plans make installing a geothermal system easier and more cost effective. By deferring your initial payments out, you can start enjoying your new system earlier and take time to obtain many of the various rebates and tax credits offered.