Compass Series Indoor Split

Compass st

The GeoComfort indoor split models offer unsurpassed flexibility of installation in both new construction and retrofit applications. The unit can be used alone or added to a conventional furnace/air conditioner in new or existing homes, creating a hybrid heating and cooling system.


GeoComfort Limited Lifetime Warranty
Compass

Product Features

Available Literature

Product Brochure

EMGL0004 thumb

ST Series Engineering Data & Installation Manual

20D082 06NN thumb

Owner's Manual

23230044001 thumb

Air Handlers & "A" Coils

EMEL1002 thumb

Product Specifications

ST024

Cooling
Full BTU
24,900
EER
16.1
Part BTU
18,300
EER
22.1
Heating
Full BTU
18,600
COP
3.4
Part BTU
14,400
COP
3.8

ST036

Cooling
Full BTU
38,000
EER
16.5
Part BTU
28,900
EER
23.9
Heating
Full BTU
28,400
COP
3.7
Part BTU
22,600
COP
4.2

ST048

Cooling
Full BTU
48,600
EER
18.7
Part BTU
39,400
EER
26.4
Heating
Full BTU
35,900
COP
3.8
Part BTU
27,900
COP
4.2

ST060

Cooling
Full BTU
62,200
EER
16.8
Part BTU
47,400
EER
22.5
Heating
Full BTU
44,200
COP
3.5
Part BTU
34,700
COP
3.9

ST072

Cooling
Full BTU
67,800
EER
15.9
Part BTU
53,700
EER
22.1
Heating
Full BTU
51,200
COP
3.4
Part BTU
41,500
COP
3.7

Available Accessories

Programmable thermostat

Keeps the home more comfortable by operating the unit on a set schedule and temperature range. This also saves on energy costs by setting the unit back while the home is unoccupied.

Non-programmable thermostat

Designed to take maximum advantage of the multi-stage functionality of the unit. This allows the unit to achieve maximum savings by only operating at the right range to match the current weather.

Auxiliary internal electric heater

Adds that little bit of extra heat on those few coldest days. Also helps to balance the system size by balancing out those few extreme days. With a standard stab-in design, you don't have to drop the blower to install.

Auxiliary external electric heater

Adds that little bit of extra heat on those few coldest days. Also helps to balance the system size by balancing out those few extreme days. These heaters are installed in the supply air duct outside of the unit. Mostly used on horizontal style equipment.

Flow centers - pressurized

Circulates the fluid through the unit and the geothermal loop field. These types form a completely closed system.

Flow centers - non-pressurized

Circulates the fluid through the unit and the geothermal loop field. This type of system uses an expansion tank that can be topped off should the loop require it due to thermal expansion.

EWC zone control

These highly sophisticated controls work with dampers in the ductwork to create multiple zones throughout the house. You can utilize one unit, but have different temperatures in each zone. The control panel controls both the unit, and the zone dampers.

Unit air pad (plastic or foam)

The unit air pad creates a buffer between the unit and the home. This buffer prevents any vibration from the unit to be transmitted into the home which improves the already quiet operation of the unit.

Electrostatic filter (washable)

This type of filter is a permanent media filter that can be washed from time to time as needed. This eliminates the need to buy new filters.

Electronic 24 volt air cleaner

This type of filter uses an electrically charged media to increase filtration performance. This improves indoor air quality by removing more particles from the airstream. This filter requires the occasional media replacement.

Disposable pleated filter

This type of filter uses a pleated media to remove dust and other particles from the air stream. It is important to check these filters regularly and replace them as needed.

Air handler (DX refrigerant or hydronic)

These multi-positional air handlers are specially matched to our split systems for maximum performance. The match also qualifies the system for the 30% U.S. federal tax credit. The air handler can be installed in remote parts of the home, or hard to reach areas where space is at a premium.

"A" coil (DX refrigerant or hydronic)

The specially matched "A" coil allows the split geothermal system to be added to an existing air handler or furnace in retrofit applications. Additionally, the "A" coil can allow the system to operate in a dual-fuel application where backup heat is supplied by a traditional furnace.

Consumer purchase plans

With a wide variety of payment options and terms, our consumer payment plans make installing a geothermal system easier and more cost effective. By deferring your initial payments out, you can start enjoying your new system earlier and take time to obtain many of the various rebates and tax credits offered.