Compass Series Horizontal Packaged

Compass ht

GeoComfort horizontal packaged systems provide efficient comfort in all conditions and are configured for installation where space for mechanical equipment is limited, such as attics and crawl spaces. Horizontal models deliver ducted heating and cooling, and can provide a portion of needed domestic hot water.


GeoComfort Limited Lifetime Warranty
Compass

Product Features

Available Literature

Product Brochure

EMGL0014 thumb

Owner's Manual

20D167 01NN thumb

Compass Series Engineering Data & Installation Manual

20D082 07NN thumb

Product Specifications

HT024

Cooling
Full BTU
23,700
EER
17.6
Part BTU
18,300
EER
22.9
Heating
Full BTU
18,900
COP
3.8
Part BTU
15,500
COP
4.2

HT036

Cooling
Full BTU
35,400
EER
16.8
Part BTU
27,100
EER
23.5
Heating
Full BTU
29,200
COP
3.9
Part BTU
22,800
COP
4.4

HT048

Cooling
Full BTU
49,500
EER
18.2
Part BTU
38,300
EER
24.9
Heating
Full BTU
37,200
COP
3.9
Part BTU
29,700
COP
4.3

HT060

Cooling
Full BTU
60,400
EER
17.5
Part BTU
47,000
EER
23.8
Heating
Full BTU
46,400
COP
3.7
Part BTU
36,700
COP
4.1

Available Accessories

Unit air pad (plastic or foam)

The unit air pad creates a buffer between the unit and the home. This buffer prevents any vibration from the unit to be transmitted into the home which improves the already quiet operation of the unit.

Auxiliary internal electric heater

Adds that little bit of extra heat on those few coldest days. Also helps to balance the system size by balancing out those few extreme days. With a standard stab-in design, you don't have to drop the blower to install.

Auxiliary external electric heater

Adds that little bit of extra heat on those few coldest days. Also helps to balance the system size by balancing out those few extreme days. These heaters are installed in the supply air duct outside of the unit. Mostly used on horizontal style equipment.

Flow centers - pressurized

Circulates the fluid through the unit and the geothermal loop field. These types form a completely closed system.

Flow center - non-pressurized

Circulates the fluid through the unit and the geothermal loop field. This type of system uses an expansion tank that can be topped off should the loop require it due to thermal expansion.

EWC zone control

These highly sophisticated controls work with dampers in the ductwork to create multiple zones throughout the house. You can utilize one unit, but have different temperatures in each zone. The control panel controls both the unit, and the zone dampers.

Programmable thermostat

Keeps the home more comfortable by operating the unit on a set schedule and temperature range. This also saves on energy costs by setting the unit back while the home is unoccupied.

Non-programmable thermostat

Designed to take maximum advantage of the multi-stage functionality of the unit. This allows the unit to achieve maximum savings by only operating at the right range to match the current weather.

Electrostatic filter (washable)

This type of filter is a permanent media filter that can be washed from time to time as needed. This eliminates the need to buy new filters.

Electronic 24 volt air cleaner

This type of filter uses an electrically charged media to increase filtration performance. This improves indoor air quality by removing more particles from the airstream. This filter requires the occasional media replacement.

Disposable pleated filter

This type of filter uses a pleated media to remove dust and other particles from the air stream. It is important to check these filters regularly and replace them as needed.